Dry wall has been in use for many decades and has gained the preference in many homes and establishments as the partitioning option. It is also preferred in ceiling installation, arch and eveas making inside a building. Gipskarton und Trockenbau Plattenheber are the main materials used for dry wall installation both for walls and ceiling. These boards are 4×8 feet in size as a standard although there are variants in some countries. This publication contains helpful insights when dealing will dry walls.
Dry wall installations
Choosing the sheets
The dry walls are sold in sheets of 4×8 feets as mentioned in the introductory note. However, larger sheets are available for commercial use or larger spaces. The experts recommend and prefer the use of larger sheets where possible to reduce the number of joints. When choosing the thickness consider the framework. You will need a thick dry wall if the frames are wide apart.
How to cut the drywall boards
The two most important determinants of how well you will cut and the boards are the saws and the drawing tools. Both need to be accurate to produce closing seams which will not be conspicuous when the final product is out. Cutting the dry wall can be a daunting task if you are a beginner. The utility knife or blade and a dry wall saw are used to cut either along or across the boards. The joints are delicate as the dry wall can easily chip off the board. Only careful cutting will lead to the best results.
Installing the dry wall
Installation work is a DIY for those with a heart. However, if you manage to cut the boards properly, then installing is easy. It is not a one many job especially on the ceiling if you need a neat job. Support devices are also used when people are fixing the materials at any one time. Right positioning of the sheets is one of the most crucial steps used.
A nail gun or an electric screw gun is used to fasten the dry walls against the wooden or metal frames beneath. If need be, you can install insulations under the walls to keep the house fireproof, sound proof or add to the warmth of the house.
Sealing the joints and top insulation
After the right installations of the boards, the seams or joints are sealed with use of fillers which correspond with the dry wall in color. Filling them properly with a filler blade and allowing to dry will give excellent results. When it comes to insulation, the work is easy although it is recommended to use a dust mask to avoid inhaling the dust. Sanding to make the seam fillers even can also be messy and dusty. The final product is a neat and even product whether installed by professional or a DIY starter.
Handling the dry walls is a relatively easy job for most people. The secret to succeeding in the job is in the use of the right tools and accurate measurements. Some other tips like using the right drywall thickness and size will also contribute to excellent results in your house interiors